On your next project, will you be using the right hammer for the job? Save yourself some time and be sure to use the right one.

Hammers come in many different shapes and forms. Using the wrong
hammer can make a project go sour real quick. It's a good idea to know
what hammers are available and when to use them.

Sledgehammer: One of the big daddy's of the hammer family. This
hammer is probably the biggest hammer you'll use. This hammer is mainly
used on outdoor projects. These hammers are designed to deliver heavy
force. To use the big daddy of hammers you're going to need some
strength and good aim. Toes and fast moving sledgehammers do not make a
good mix! There are smaller hand sized sledgehammer's available as
well.

Mason's Hammer: Great for working on brick, concrete or mortar.
This hammer is often used for cutting and setting brick. It can be used
as a hammer or a chisel when laying brick.

Mallets: Mallets are a great hammer to use when restraint is
needed. These hammers are also a good replacement for steel hammers
when concerned about marring a surface. Great for driving chisels and
for woodworking. The heads or mallets can be made of different
materials, usually wooden, rubber or plastic.

Deadblow: Another good hammer to use when concerned about
marring a surface. The deadblow is designed to reduce and eliminate
bouncing on contact. Most deadblows are made of plastic.

Framing Hammer: A long handled hammer normally used by
carpenters to frame houses. It has a milled face to reduce slipping off
nails on contact. You can find smooth faced framing hammers as well
which are often used for decking. A framing hammer is fairly heavy to
drive nails easier.

Claw Hammer: Very similar to a framing hammer but is much
lighter. This hammer is a toolbox must and is more of a general use
hammer. When using a claw hammer try and grip the base of the handle
rather than the head. This will give you more accuracy and leverage.

Tack Hammer: Designed mainly to use on nailing tacks. This
hammer is usually small in size and fairly light, about 5 Oz. Most tack
hammers are magnetized to pick up tacks that have fallen.

Ball Peen Hammer: This hammer is mainly used for cold chisels
and forming metal. As it's name describes, it has one side with a ball
on it and one side with a smooth face. There are many different sizes
of ball pein hammers to choose from.

Roofing Hammer: This hammer is really a job specific tool. The
face is always milled, often square, and the peen will be either a
standard sharp hatchet for trimming cedar shingles or equipped with a
tiny razor blade for cutting asphalt shingles.

Drywall Hammer: Used to install drywall. It has a pronounced
mushroom shape to the face and an odd, dull hatchet-shaped peen. The
peen's flat shape helps somewhat when beating nails inside corners. The
head of the drywall hammer is angled upward for extra reach. The face
is lightly milled and sometimes also truncated across the very top of
the head for driving nails near the ceiling.

Always wear safety glasses when hammering as broken pieces of
nails can become dangerous shrapnel. It also may not be a bad idea to
wear gloves on the first day you work with a new hammer. It can really
help prevent getting blisters.